USER INSTRUCTIONS
WHICH SECTION ARE YOU INTERESTED IN?
Frequently Asked Questions
WHAT TO DO BEFORE USE
▶️ Wash all parts with warm water and soap.
▶️ Clean the heating base with a damp cloth, without submerging it in water.
▶️ Assemble the device: place the central container, insert the top rack, and close with the lid.
▶️ Perform a empty sterilization cycle: pour 75 ml of distilled water and start a "Sterilize" cycle without accessories.
HOW TO PERFORM A STERILIZATION CYCLE
▶️ Wash bottles and accessories before sterilization.
▶️ Fill the base with water (from 60 ml to 160 ml).
▶️ Place the bottles upside down in the central container and the accessories in the top rack.
▶️ Close the lid and start the cycle by pressing the "Sterilize" button.
▶️ Wait for the audible signal indicating the end of the cycle.
HOW TO PERFORM A DRYING CYCLE
▶️ Press "On/Off", then "Dry".
▶️ Adjust the time with the + and - buttons (default 60 min, adjustable from 15 to 90 min).
▶️ Wait for the audible signal indicating the end of the cycle.
FUNZIONE AUTOMATICA
• Fill the base with water and place the items.
• Press "Auto" to perform sterilization, drying, and maintenance in an automatic sequence.
• The contents will remain sterile for up to 24 hours if the lid remains closed.
• The control panel will display the current temperature in real-time.
MAINTAINING STERILIZATION
• Press "Storage" and set the desired time (from 12 to 72 hours).
• The device will perform a 5-minute drying cycle every hour.
DELAYED START
• Press "Preset" and set the timer up to 24 hours.
• Select the desired function between "sterilization" or "drying".
• The device will start automatically at the set time.
Frequently Asked Questions
✅ WHAT TO DO
▶️ Wash the items before sterilization.
▶️ Allow the device to cool down before touching or disassembling it.
▶️ Replace the HEPA filter every 3-6 months to ensure clean air during the drying cycle.
▶️ Adjust the drying time based on the humidity of the bottles.
❌ WHAT NOT TO DO
▶️ Do not fill the tank beyond the MAX level indicated.
▶️ Do not use the sterilizer without water.
▶️ Do not open the lid during the cycle to avoid the risk of burns.
▶️ Do not submerge the base of the sterilizer in water.
▶️ Do not use harsh cleaning agents.
▶️ Do not use the device without the HEPA filter installed.
Frequently Asked Questions
✅ DAILY CLEANING
▶️ Disconnect the device and allow it to cool down.
▶️ Clean the base with a soft, damp cloth.
▶️ Wash the trays and lid with warm water and soap.
All removable parts of the sterilizer are also dishwasher-safe.
🔴 HOW TO REMOVE CALCIUM DEPOSITS
▶️ Mix 20g of citric acid with 140ml of cold water.
▶️ Pour the solution into the heating base and run the "Sterilize" program for 3 minutes.
▶️ Empty the base and rinse with clean water.
We recommend performing a thorough cleaning to remove calcium deposits at least once a month to ensure the proper functioning of the device.
Frequently Asked Questions
The sterilization cycle lasts approximately 8 minutes.
It depends on the amount of water added, but it typically lasts 5 minutes.
No, the device does not wash the items. It is designed for sterilization and drying only. You should wash the items before placing them in the sterilizer.
No, the bottles and accessories must be washed before sterilization.
The items remain sterilized for up to 24 hours as long as the lid remains closed.
Up to 24 hours if the lid remains closed.
Can I use tap water?
Yes, you can use tap water to start the sterilization cycle.
Can I sterilize accessories and metal parts?
No, ti sconsigliamo di sterilizzare oggetti in metallo.
Si può usare per sterilizzare giochi in plastica?
Yes, if they are steam-resistant.
Yes, if they are steam-resistant.
Frequently Asked Questions
The device does not turn on.
If the device does not turn on, it may not be properly connected to the power outlet.
Check the plug and press "On/Off".
Limescale on the plate.
If there is limescale on the plate, perform the descaling process described in the "cleaning and maintenance" section to remove it and ensure the sterilizer works properly again.
Baby Bottles still wet.
If your bottles are still wet after the drying process, it means the selected drying cycle is too short.
Select a longer time to complete the drying.
The plate does not heat.
If the plate does not heat, there may be a build-up of limescale.
Remove the limescale by following the cleaning and maintenance instructions to use the device correctly again.
The device emits strange odors.
If the device emits strange odors, there may be a build-up of limescale.
Remove the limescale by following the cleaning and maintenance instructions to eliminate the odors and use the device properly again.
The device turns off by itself.
If the device turns off by itself at the end of the sterilization and/or drying cycle, don't worry, it doesn't mean it is damaged: this is a normal safety feature.
Since this is not a problem, no action is needed.
Didn't you find what you were looking for? SEND YOUR REQUEST