INFO CENTER

1. PREPARATION:
Before using the Nuvita 1260W Materno Comfort, wash your hands thoroughly. Make sure all components are clean and correctly assembled according to the assembly instructions. Do not assemble the main unit and USB cable while cleaning.

2. POSITIONING:
Find a quiet and comfortable place to sit. Use a footrest if needed to maintain a relaxed, upright posture. Before expressing, you may gently massage your breast with a warm towel to help stimulate milk flow.

3. APPLICATION:
Place the silicone cup over the nipple and ensure it fits snugly against the breast, without any air gaps. Hold the unit with one hand and support your breast with the other.

4. POWER ON:
Press and hold button (A1) to turn on the device. The light will flash and the display will show the current suction level. The breast pump starts in "stimulation mode".

STIMULATION (LEVEL 1~9):
In this mode, the breast pump produces a relatively fast suction rhythm with low expression strength. It gently stimulates the breast and encourages milk let-down by mimicking a baby’s initial, lighter sucking pattern. It is recommended to use this mode before switching to the others.

EXPRESSION (LEVEL 1~9):
This mode replicates the deeper and slower sucking rhythm of a newborn during active feeding. The suction strength is higher and the frequency slower compared to stimulation mode. This setting is designed to help express milk more effectively once let-down has begun.

ANTI-STASIS (LEVEL 1~9):
The anti-stasis mode provides a pulsing suction rhythm to thoroughly remove any remaining milk after expression. Regular use can help prevent milk stasis, reduce the risk of clogged ducts, and maintain a steady milk flow.

NIPPLE CORRECTION MODE: (LEVEL 1~3)
Uses gradual and consistent suction to help correct inverted or flat nipples. It should be used periodically to improve nipple shape and support proper latching or expression.

WHAT TO DO AFTER EACH USE

Disassemble and rinse all parts that come into direct contact with the breast and breast milk (excluding the main unit) in lukewarm water to remove any milk residue. Allow all parts to air dry completely and store the breast pump in a clean, dry place.

HOW TO DISINFECT DAILY

▶️ Wash your hands thoroughly.
▶️ Separate all parts that come into direct contact with the breast and breast milk and need to be disinfected.
▶️ Use boiling water or a steam sterilizer for 5 minutes.

⚠️ DO NOT boil parts 2, 5, 7, 9, and 10 shown in the image in the "components" section.
Parts 3, 4, and 8 shown in the image in the "components" section must not come into contact with hot metal surfaces.

CLEANING PRECAUTIONS

▶️ Disassemble all accessories that come into contact with the breast or breast milk (except the main unit).
▶️ After each use, clean the parts immediately to prevent residue buildup and bacterial growth.
▶️ Make sure to assemble/disassemble each accessory as shown in the video in the section "How to Disassemble and Reassemble the Breast Pump," without losing any parts during the process.
▶️ All silicone components can be sterilized (except the main unit).
❌ Do not boil or steam sterilize the valves for more than 3 minutes.
❌ Do not boil or steam sterilize the milk collection cup for more than 5 minutes.