WHICH SECTION ARE YOU INTERESTED IN?
PANNELLO DI CONTROLLO
CONTROL PANEL
To use the Nuvita 1980 rechargeable baby food warmer, follow these steps:
▶️ Unplug the charging cable and place the food in the bowl.
▶️ Hold the "On/Off" button for 2 seconds.
▶️ Gently touch the "Function" button to select the appropriate function. The device will start heating automatically after 2 seconds.
⚠️ WARNING ⚠️
▶️ Before using the device for the first time, charge the battery to 100%.
TEMPERATURE MONITORING
• The control panel will display the current temperature in real time.
• It may be helpful to stir the food for even heating, taking care not to scratch the bottom of the bowl.
• It is recommended to start feeding the baby when the temperature is between 40-45°C.
SAFETY WARNING FOR HIGH TEMPERATURES
• If the temperature of the food exceeds 48°C, the high-temperature warning light will turn on (6), indicating that the food is too hot for the baby.
SAFETY REMINDER
• It is a useful function that alerts the user when the electronic device has remained on or active, helping to prevent a device from being unintentionally left on.
CHILD SAFETY LOCK
Activation:
When the device is on, hold down the function button (8) for 2 seconds. The child lock indicator will flash 3 times, indicating that the child lock is activated. In child lock mode, pressing any other button will cause the child lock indicator to flash 3 times (once per second).
Deactivation:
In child lock mode, hold down the function button (8) for 2 seconds to deactivate the child lock.
BABY FOOD WARMER FUNCTIONS
▶️ Simply touch the function button (8) gently to choose one of the functions, which will activate automatically after two seconds. Press the button multiple times until you reach the desired function.
⚠️ WARNING ⚠️
▶️ When the baby food warmer IS NOT connected to power, only the heating functions of 40°C, 45°C, or 50°C and the Pasteurization function at 65°C can be selected.
▶️ To use the "temperature maintenance" or "yogurt maker" functions, the food warmer MUST be connected to power.
Function "PASTEURIZATION"
• To activate the "Pasteurization" function, press the function button again after the 50°C function.
• The pasteurization function must be used with the container empty and clean (washed with running water and dried) and the lid in place. This function helps reduce the bacterial load of common bacteria, such as Listeria monocytogenes, Escherichia coli, Salmonella, etc.
• Do not touch the inside of the bowl to avoid burns while the baby food warmer is in operation. The device will automatically turn off when the pasteurization cycle is completed.
How to make YOGURT
• Connect the charging cable to the power supply with 5V-2A output and insert the other end of the cable into the charging port to enter charging mode.
• Open the lid, pour fresh whole pasteurized milk into the bowl, add unsweetened whole white yogurt and any other ingredients needed based on the recipe you choose to follow, then close the lid.
• Hold the power button for 2 seconds, then gently touch the function button (8) and select the "yogurt" program. The yogurt will be ready after 10 hours.
CLEANING
✅ WHAT TO DO
▶️ After each heating, thoroughly clean the inside of the warming bowl.
▶️ Before washing, wait for the bowl to cool down and make sure the closure cap of the USB charging port is closed.
▶️ Wash under running lukewarm water.
▶️ Add a small amount of water inside the bowl diluted with some dish soap, clean with a non-abrasive sponge, and rinse with clean water, even under running water.
🔴 WHAT NOT TO DO
▶️ Do not use boiling water for washing.
▶️ Do not wash in a dishwasher.
▶️ Do not use sterilizers for cleaning.
▶️ Do not immerse the bowl in water.
▶️ Do not use an abrasive sponge.
BATTERY LEVEL
▶️ When the battery is fully charged, all the indicator lights will be on.
▶️ When the battery is low, the battery indicator light will flash white ⚪ for one minute before turning off.
▶️ During charging, the battery indicator will flash alternately.
▶️ When fully charged, the white light ⚪ will remain on and steady for one minute before the screen automatically turns off.