USE OF BUTTONS
WHICH SECTION ARE YOU INTERESTED IN?
USING THE BUTTONS
Frequently Asked Questions
✅ DO
▶️ Insert the chosen nozzle into the collection tank before attaching it to the main body of the vacuum cleaner.
▶️ To remove, gently pull the nozzle out of the tank.
Frequently Asked Questions
✅ DO
▶️ Always keep the product upright or at an angle no greater than 20°.
▶️ Always check that the tank is not full and, if necessary, empty and rinse it.
⚠️ ATTENTION ⚠️
▶️ Do not use the aspirator more than recommended, as excessive use may irritate your child's delicate nasal passages.
▶️ If your child seems particularly restless or if you have any doubts about how to use the aspirator, it is always best to consult a pediatrician.
A) PREPARATION
• First of all, make sure the vacuum cleaner is clean and assembled correctly according to the instructions.
• Always wash your hands before using the aspirator to avoid passing germs to your baby.
B) POSITIONING THE CHILD
• Sit or lie your baby down in a comfortable position. You can hold him in your arms if that makes him calmer.
• It is important that the child is as relaxed as possible to facilitate the process.
C) CORRECT USE OF THE VACUUM CLEANER
• Turn on the aspirator and test the suction on your hand to make sure it is not too strong.
• Gently place the tip of the aspirator at the entrance of one of the baby's nostrils, making sure not to insert it too deeply.
• During use, ensure that the child does not hold his or her breath and that the mouth remains open to avoid pressure imbalances in the ear. Discontinue use immediately if pain or discomfort occurs.
• Turn on the aspirator and let it suck up the mucus. This usually only takes a few seconds.
• Repeat the operation on the other nostril if necessary.
• If the mucus seems particularly thick, you can help thin it out by using a little saline solution before suctioning. Put a few drops of saline solution in your child's nostrils and wait a minute before using the aspirator.
• It is important to be gentle and quick to avoid stressing the baby.
Frequently Asked Questions
✅ HOW TO PERFORM SELF-CLEANING
▶️ Fill a bowl with warm water.
▶️
Immerse ONLY THE TIP OF THE NOZZLE of the nasal aspirator into the water.
▶️ Activate suction for 30 seconds. The water will pass from the nozzle to the tank and be expelled from the side, ensuring that every involved part is properly cleaned.
▶️ At the end of the cleaning process, shake the device while keeping the nozzle tip facing downward to ensure all water residues are completely expelled.
▶️ While keeping the device with the nozzle tip facing downward, remove the nozzle and the tank and place the device upright with the connector side on a cloth to help drain any remaining water drops that could enter the main body and cause irreparable damage.
⚠️ WARNING ⚠️
Clean the device before each use.
After circulating water through the closed suction system, the device will expel the water through a hole located on the tank, so PERFORM THIS OPERATION OVER A SINK.
NOZZLES AND TANK
After the self-cleaning process, the nasal nozzles and the mucus collection tank can be rinsed under running water and sterilized with heat (100°C) in boiling water or using a steam sterilizer.
❌ WHAT NOT TO DO
• Never place the main body in the dishwasher or under running water.
• Never use cleaning substances that may be toxic if they come into contact with skin or mucous membranes, or if ingested or inhaled.
• Avoid mechanical cleaning with brushes or similar tools, as this may cause irreparable damage.
CHARGING THE DEVICE
Didn't find what you were looking for? SEND YOUR REQUEST