WHITE NOISE DIFFUSER AND NIGHT LIGHTS - Easy Dream 6620


INFO CENTER

WHICH SECTION ARE YOU INTERESTED IN?

CONTROL PANEL

1. Power button: long press to turn on/off; short press to pause/play sound.
2. Volume button [–]: press the volume down button to decrease the speaker volume.
3. Volume button [+]: press the volume up button to increase the speaker volume.
4. Night light button: short press to turn the light on/off, long press to adjust the brightness.
5. Night light colour selection: short press to choose from the 5 available colours: red, yellow, green, blue and white.
6. Lullabies: short press to switch from one lullaby to another among the 9 available lullabies.
7. Nature sounds: short press to switch from one nature sound to another among the 15 available.
8. White noise: short press to switch from one track to another among the 6 available white noise tracks.
9. Child lock: press and hold the power button and the Volume + button simultaneously for about 3 seconds to activate the lock and prevent children from pressing the buttons. When the lock is active, no other button works. Press and hold these two buttons again to remove the lock and restore normal operation of the device.

INDICATOR LIGHTS

1. The indicator light stays on when the device is in operation.
2. The indicator light turns on if a 30-minute timer has been activated.
3. The indicator light turns on if the child safety lock has been activated.
4. The indicator light turns on if a 90-minute timer has been activated.
5. The indicator light turns on if a 60-minute timer has been activated.
6. Charging indicator light: the indicator is always red 🔴 in charging mode and always green 🟢 when charging is complete.

HOW TO ACTIVATE THE SOUND



▶️ Press the power button (1) for 2 seconds to turn on the device. The green LED power indicator will light up.
▶️ Press the button to select the sound you wish to hear.
▶️ Press the volume adjustment buttons (2) and (3) to adjust the sound playback volume.
▶️ Press and hold the power button (1) for 2 seconds to turn off the device.
▶️ When the device is on, press the power button (1) to pause/play the audio.

MEMORY FUNCTION

There is a memory function which means that when the device is turned on, it always plays the last sound used.

NIGHT LIGHT MODE



▶️ Briefly press the night light button (4) to turn on the night light.
▶️ Press and hold the night light button to switch from dim to bright light.
▶️ Release the button to stop the operation; after releasing it, press and hold again to gradually switch to soft light.
▶️ Release the button to stop adjusting the brightness.
▶️ Briefly press the timer button (5) to change the colour of the night light among 5 available colours: red, yellow, green, blue and white.
▶️ Briefly press the night light button (4) to turn off the night light.

AUTOMATIC SLEEP TIMER



▶️ When the device is on and playing audio, you can set the timer to automatically turn off the device after 30, 60 or 90 minutes.
▶️ Press and hold the timer button (5), the green LED timer indicator will light up.
▶️ Continue pressing and holding the timer button (5) to cycle through the options.
▶️ When the green LED is off, the timer function is deactivated.

HOW TO POSITION THE DEVICE



For noise masking purposes, the device is most effective when positioned between the user and the source of the noise.

In general, we recommend placing the unit at least one metre away from you or your child: this allows the sound to fill the space to provide the maximum noise masking benefit and create a relaxing sound environment that promotes sleep, concentration or privacy.

PRACTICAL EXAMPLES

- In an urban environment, the unit could best be positioned near the window to block noise coming from the street.
- If you have a noisy neighbour, the most useful position will be against a shared wall.
- If the noise comes from within your home, place the device as close as possible to the source of the disturbing noise for maximum relief.
- If the noise comes from right next to your head, such as a snoring partner, the unit should be placed on the bedside table on your side of the bed.
Didn't find what you were looking for? SEND YOUR REQUEST

YOUR CART (0)

No Products in the Cart