CONTROL PANEL
WHICH SECTION ARE YOU INTERESTED IN?
MAIN FEATURES
DUAL-MODE CONNECTIVITY
- Non-Wi-Fi mode: The baby camera communicates directly with the parent unit via a secure 730 MHz–930 MHz wireless frequency. No router or internet connection is required. Range of up to 600 m outdoors / 40–70 m indoors (depending on walls and obstacles).
- Wi-Fi mode: Connect the camera to your home 2.4 GHz Wi-Fi network and use the Nuvita Home app to monitor your baby from anywhere with an internet connection.
The two modes work independently: the parent unit always operates without Wi-Fi, while the Nuvita Home app provides remote access when Wi-Fi has been configured.
FULL HD 1080P VIDEO WITH PAN & TILT
- Camera resolution: 1920×1080P Full HD at 20 fps
- Parent unit display: 5-inch HD colour LCD display (1280×720P)
- 355° horizontal pan — 110° vertical tilt, remotely controlled via the parent unit or the Nuvita Home app.
- Digital zoom: ×2 / ×4
INFRARED NIGHT VISION
- 940 nm IR LEDs: invisible to the human eye and completely safe for your baby's eyes
- Effective range: 5–8 metres
- Automatic activation in low-light conditions: colour image during the day and black-and-white image at night.
VOX MODE (SOUND-ACTIVATED MONITORING)
The screen automatically switches on when a sound above the set threshold is detected, then switches off again to help save battery power.
- 3 VOX sensitivity levels on the parent unit: High, Medium, Low.
- 2 VOX sensitivity levels in the app: High, Low.
- 3 motion detection sensitivity levels in the app: High, Medium, Low.
- 3 VOX sensitivity levels on the parent unit: High, Medium, Low.
- 2 VOX sensitivity levels in the app: High, Low.
- 3 motion detection sensitivity levels in the app: High, Medium, Low.
ECO MODE
Reduces power consumption by switching off or dimming the parent unit screen during quiet periods. The screen switches back on when a sound is detected. Ideal for monitoring during the night.
TEMPERATURE MONITORING
- Real-time room temperature display on the parent unit.
- Set maximum and minimum temperature thresholds for alerts.
- Visual and audible alarm when the temperature falls outside the set range.
LULLABIES AND SOUNDS
7 built-in audio tracks played through the baby camera speaker:
- 3 lullabies · 2 white noises · 2 nature sounds
- 2 white noises
- 2 nature sounds
Volume can be adjusted from the parent unit or the Nuvita Home app.
- 3 lullabies · 2 white noises · 2 nature sounds
- 2 white noises
- 2 nature sounds
Volume can be adjusted from the parent unit or the Nuvita Home app.
TWO-WAY COMMUNICATION
- Press and hold the Talk button on the parent unit to speak to your baby through the camera speaker. This feature is also available through the Nuvita Home app.
SMART ALERTS
- Cry detection: AI detects when your baby is crying.
- Motion detection: Detects movement within the camera's field of view (app).
- Sound detection: The sound level exceeds the set threshold.
- Temperature alarm: The temperature falls outside the set range.
- Out-of-range alarm: The parent unit moves outside the wireless range.
- Feeding reminder: scheduled feeding times.
- Low battery: The parent unit battery is running low.
MULTI-CAMERA SUPPORT
- One parent unit supports up to 4 baby cameras.
- View cameras in cycle mode (automatic switching) or split-screen mode.
- Switch between cameras using the CAM button.
ZOUNDREAM AI TECHNOLOGY
VideoVoice 5 AI features Zoundream AI technology (AMSI engine — Acoustic MultiStage Interpreter), which interprets your baby's cries with up to 92% accuracy.
HOW IT WORKS
1. Cry detection: The system detects when your baby is crying and sends an alert to the parent unit and/or the app.
2. Cry interpretation: AI analyses the baby's cry pattern and identifies the most likely cause from five categories:
🍼 Hunger - Your baby is hungry
😴 Sleepiness - Your baby is tired and wants to sleep
💨 Gas - Your baby has colic or abdominal gas
😣 Discomfort - Your baby is uncomfortable (nappy, position...)
😤 Irritation - Your baby is overstimulated or irritated.
This interpretation helps parents quickly understand the likely cause of their baby's crying and respond in the most appropriate way, reducing stress and response time. The AI analysis result is delivered in approximately 15 seconds via an app notification.
Zoundream subscription plan
- 3 months of free subscription included with every VideoVoice 5 AI
- After the free period: €5/month
Privacy and data protection
Your privacy and your baby's privacy are important. To use the Cry Interpretation service, you will need to create a Zoundream account or sign in to an existing account. The service securely analyses your baby's cries to provide detection and interpretation features. Audio data is processed by Zoundream exclusively for the purpose of providing the service and is handled in accordance with applicable data protection laws, including the GDPR (EU Regulation 2016/679). For full details, please refer to Zoundream's Privacy Policy, available during account registration and within the app.
INITIAL SETUP
STEP 1: CHARGE THE PARENT UNIT
➡️ Connect the included USB Type-C cable to the Type-C charging port on the parent unit.
➡️ Connect the cable to the included power adapter (5V / 2A) and plug it into a power outlet.
➡️ Fully charge the unit before using it for the first time. The battery indicator shows the charging progress.
➡️ Repeat the procedure with the second cable and adapter to charge the baby camera.
STEP 2: TURN ON THE CAMERA
➡️ Connect the baby camera to the included power adapter — it will switch on automatically.
➡️ The status LED on the camera will light up.
STEP 3: POSITION THE CAMERA
➡️ Place the camera on a stable surface, or mount it on a wall or shelf using the included bracket.
➡️ Position the camera at least 1 metre (3 feet) away from your baby and out of reach.
➡️ Route ALL cables away from the cot and secure them safely — cables pose a strangulation hazard.
➡️ Do not mount the camera directly above the cot.
➡️ Point the lens towards the area where your baby sleeps. Pan and tilt can be adjusted remotely after setup.
⚠️ IMPORTANT SAFETY INFORMATION
- Use only the power adapters included in the package.
- Do not place the camera or power cable within your baby's reach.
- Do not place the camera or power cable within your baby's reach.
PAIRING THE CAMERA WITH THE MONITOR
STEP 1: OPEN THE CAMERA MENU
➡️ Press the Menu button to open the main menu.
➡️ Use the arrow buttons to navigate and select the camera icon.
➡️ Press OK to confirm.
STEP 2: SELECT "ADD CAMERA"
➡️ In the camera menu, select the + icon.
➡️ Press OK to confirm.
STEP 3: PAIR THE CAMERA
➡️ Press and hold the Reset / PAIR button on the back of the baby camera for approximately 5 seconds.
➡️ The monitor screen will display "Pairing in progress..." and confirm once the connection has been successfully established.
⚠️ The parent unit must always have at least one camera connected.
Adding additional cameras (up to 4)
➡️ Turn on the new camera.
➡️ On the parent unit: Menu → Camera icon → + icon → OK.
➡️ Press and hold the PAIR button on the new camera.
➡️ Once paired, use the CAM button to switch between cameras or select split-screen mode from the menu.
How to remove a camera
➡️ Menu → Camera icon → Bin icon → OK
➡️ Select the camera you want to remove → press OK → confirm with YES.
NUVITA HOME APP
DOWNLOAD AND SET UP THE NUVITA HOME APP
➡️ Download the Nuvita Home app from the App Store (iOS) or Google Play (Android).
➡️ Create an account in the Nuvita Home app or sign in if you already have one.
➡️ Connect your smartphone to your home 2.4 GHz Wi-Fi network.
➡️ In the app, tap the + icon to add a new device.
➡️ Follow the instructions in the app to connect the camera to Wi-Fi. You will be asked to enter your password.
➡️ Once connected, the camera will appear in the app. You will have access to the following features: live video, two-way communication, motion detection, cry detection and Zoundream AI cry interpretation.
➡️ To share access with family members, use the Share Device function in the app.
CLEANING AND MAINTENANCE
CLEANING INSTRUCTIONS
➡️ Disconnect the product from the power supply before cleaning.
➡️ Use a soft, dry, lint-free cloth on all external surfaces.
➡️ If necessary, lightly dampen the cloth with water, without soaking it.
➡️ Clean the camera lens only with a soft, dry cloth suitable for optical surfaces.
➡️ Allow all components to dry completely before reconnecting them to the power supply.
❌ Do not use solvents, abrasive cleaners, alcohol-based products or sprays.
❌ Do not allow liquids to enter the charging ports, TF card slot, speakers or microphone.
MAINTENANCE
➡️ Regularly check cables and adapters for damage or excessive wear and replace them immediately if damaged.
➡️ If the camera is wall-mounted, regularly check that the bracket and screws are securely fastened.
➡️ Store the product in a cool, dry place if it will not be used for an extended period.
❌ Do not attempt to open, repair or modify the product. If you need assistance, contact Nuvita Customer Support.
FREQUENTLY ASKED QUESTIONS
The parent unit does not display video from the camera.
• Make sure the camera is switched on and connected to the power supply.
• Check that you are within the operating range (600 m outdoors / 40–70 m indoors).
• Press the CAM button to select the camera again. If the problem persists, reset the camera and pair it again.
• Check that you are within the operating range (600 m outdoors / 40–70 m indoors).
• Press the CAM button to select the camera again. If the problem persists, reset the camera and pair it again.
The Nuvita Home app cannot find the camera during setup
• Make sure your smartphone is connected to a 2.4 GHz Wi-Fi network (5 GHz-only networks are not supported).
• Check the Wi-Fi password.
• Move the camera closer to the router during the initial pairing process. If your router uses the same SSID for both frequency bands, temporarily separate them or connect your phone specifically to the 2.4 GHz band.
• Check the Wi-Fi password.
• Move the camera closer to the router during the initial pairing process. If your router uses the same SSID for both frequency bands, temporarily separate them or connect your phone specifically to the 2.4 GHz band.
Zoundream AI cry interpretation is not working
• Cry interpretation requires an active Wi-Fi connection and the Nuvita Home app. It is not available in Non-Wi-Fi mode (parent unit only).
• Check that your internet connection is working and that the camera is connected to Wi-Fi through the app.
The night vision image is black and white. Is this normal?
Yes, this is completely normal. In night vision mode, the camera uses 940 nm infrared LEDs (invisible to the human eye and safe for your baby), and the image is displayed in black and white. This is the standard operation of infrared night vision.
The battery drains quickly. How can I extend battery life?
Activate VOX mode or Eco mode: in these modes, the screen switches off during quiet periods and turns back on when sound is detected.
> • Reduce the screen brightness.
> • Make sure the unit is fully charged before use.
The camera's pan and tilt functions do not respond to commands from the parent unit.
• Make sure you are within operating range, the camera is switched on and the camera feed is displayed on the screen. Then try using the navigation buttons again.
• If the problem persists, restart both units.
Can multiple family members access the camera at the same time?
• Yes. Use the Share Device function in the Nuvita Home app. Each user needs their own Nuvita Home account.
The out-of-range alarm keeps activating indoors.
The indoor range is 40–70 m and may be reduced by thick walls, metal structures or interference from other wireless devices.
Move the parent unit closer to the camera and avoid placing the devices near metal objects or microwave ovens.
Didn't find what you were looking for? SEND YOUR REQUEST